M5Stack Basic Version

Regular price $234.00

M5Core BASIC

basic_02 basic_03

Description

The M5Stack BASIC is a black development kit based on ESP32 chip composed of a black M5Core and a Bottom Base board. You can even program The M5Stack BASIC through Blockly, Arduino or MicroPython. The black core is a basic kit and it does not own any MEMS chip(like MPU9250…).

This is a Bottom board on the back of M5Core. It’s designed for expanding gpio on M-Bus besides I2S Pins(GPIO0, GPIO12, GPIO13, GPIO15, GPIO34)for DIY. Each gpio on M-Bus is expanded as pin and port for convenience and flexibility.

Feature

Source PinMap

LCD & TF Card

LCD Resolution: 320x240

ESP32 Chip GPIO23 GPIO19 GPIO18 GPIO14 GPIO27 GPIO33 GPIO32 GPIO4
ILI9341 / MISO CLK CS DC RST BL
TF Card MOSI MISO CLK CS

Button & Speaker

ESP32 Chip GPIO39 GPIO38 GPIO37 GPIO25
Button Pin BUTTON A BUTTON B BUTTON C
Speaker Speaker Pin

GROVE 接口 A & IP5306

Power Management IC (IP5306) is a custom I2C version, and the IIC address of IP5306 is 0x75. Click here for view register manual.

ESP32 Chip GPIO22 GPIO21
GROVE A SCL SDA
IP5306 SCL SDA 5V GND

Parameter

Source Parameter
ESP32 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth
Flash 4M-Bytes
Input 5V @ 500mA
Interface TypeC x 1, GROVE(I2C+I/0+UART) x 1
LCD 2 inch, 320x240 Colorful TFT LCD, ILI9342
Speaker 1W-0928
Battery 150mAh @ 3.7V
Op.Temp. 32°F to 104°F ( 0°C to 40°C )
Size 54 x 54 x 12.5 mm
C.A.S.E Plastic ( PC )
Weight 120g with bottom, 100g only core

NOTE:

*We have several kinds of Cores, the following figures show the main differece with them. *

  • If you want to view the detailed difference with them, please click here.

  • If you want to download the detailed difference with them, please click here.